Outdoor dining table – An outdoor dining table allows you to carry a meal outside while keeping yourself and your food out of the world. Tables can be built on almost any material depending on your needs and preferences. For less money than a wooden or metal table, a vinyl picnic table is easily built in less time. Vinyl also has the advantage when it comes to cleanup. A water hose, some soap and a nail brush are all you need to maintain it. Things you need: 4 pieces PVC pipes (2 inches by 96 inches), 6 pieces PVC tubes (2 inches by 36 inches), and 8 3-way PVC couplings (2 inches in diameter) hotel deals sandpaper.
Also clean cloths, PVC primer, PVC glue, 3 vinyl tires boards (48 inches), galvanized tire screws, stay with Phillips bit, 8 vinyl tire boards (96 inches) on. For the instructions of building outdoor dining table, build a rectangle of PVC 3 meters wide by 8 meters long. Cut the pipe with the streaks and sand the edges of the ends. Sand the inner edges of the 3-way couplings are necessary to form rectangle and dry dust away. Apply primer on sandblasted surfaces, then immediately coat with PVC glue. Slide the tubes in the angled links to form the rectangle leaving the empty openings in the couplings upward. Build the leg sections by forming squares 3 meters by 3 meters using the open ends of the couplings. Sand, prime and glue in the current structure. Apply 3-way links at the top leaving the open ends pointing along the long axis of the original rectangle. Glue pipes into the open ends of the new links to complete the rectangular framing. Let the paste cure for 30 minutes. Put 48-inch vinyl ornaments for your outdoor dining table frame with galvanized screws. Place a board 12 inches from each end of the frame and one in the middle by screw driving through the planks and into PVC. Screw 96-inch deck boards to the hanger boards. Leaves 1/4 inch between the planks with 12 inches of hanger on each end.