Steps Customize Metal Dining Table

Feb 8th

Metal Dining Table – In the house to which we are doing a facelift, we will be missing a dining table, we have chairs that we will have to change their appearance to match the other changes made, but we do not have a table for to be able to eat. Therefore, we will make a custom-made metal and wood table to take advantage of the existing space in the small kitchen-living room. On the other hand, I have to apologize because I do not have ideas of the process of making the wooden cover of the table.

Metal Dining Table Style
Metal Dining Table Style

The only disadvantage of making the table with metal is that we have to know how to work the same, and also have specialized tools in that material: cutting machines, arc welding. At the end of the process, we will have a nice and functional metal dining table made by ourselves, with the measures we need and for the place where we are going to locate it. Specifically, this table will have total measurements of 1.40 cm long, 90 cm wide and 76 cm high. Important note: we must use the protective measures necessary to make the dining table of metal and wood, such as gloves, ear protectors. We start by cutting the legs, widths, and lengths of the dining table.

12 Photos Gallery of: Steps Customize Metal Dining Table

Image of: Metal Dining Table Style
Image of: Metal Dining Table Sets
Image of: Metal Dining Table Reclaimed
Image of: Metal Dining Table Modern
Image of: Metal Dining Table Innovative
Image of: Metal Dining Table Frame
Image of: Metal Dining Table Creative
Image of: Metal Dining Table Country
Image of: Metal Dining Table Comtemporary
Image of: Metal Dining Table Combine
Image of: Metal Dining Table Classic
Image of: Metal Dining Table Black
 

For this, we can use a grinder or radial and support for himself, a metal cutter. The cutting measures, in my case and for a metal dining table with total measurements of 1.40 in length, 90 in width and 76 cm in height are: the legs to 72 cm (using the 50 × 50 mm squares), the lengths to 1.10 cms (using the squares of 35 × 35 mm), the widths to 70 cm (using the squares of 35 × 35 mm). In the next step, we will devote to review, with the grinder or radial and review disc, all the cutting areas to remove the burrs generated. To be able to easily and quickly attach the wooden cover to the metal structure, we can use a piece of plate that we will cut to 5 cm.