Your 120 inch dining table and chairs must fit together to provide a comfortable dine experience that you and your family or friends sit around the table. And then when choosing a table and chairs, take measurements of both tables and chairs to ensure that they fit properly together. By measuring the height and width of dining chairs, and then you can know that the chairs will provide a comfortable dining experience for all guests sitting at the table. How to measure chairs to fit 120 inch dining table is measure the height of the dining table from the floor to the bottom of the table. A comfortable table height is between 28 and 28.5 inches. And also if the table has a suburban (a support piece that stretches between the legs), the distance between the floor and the bottom edge of the front seat must be between 24.5 to 25 inches.
Wait at least 24 inches of dining area along the table for each envelope, although most dining chairs are approximately 20 inches long. Then if you have an oval dining table, and you will be able to fit more diners around the table than if you have a rectangular 120 inch dining table. And then this is because one can often squeeze an extra chair or two around the curves while, due to its corners, doing the same with a rectangle can be difficult.
13 Photos Gallery of: How to Measure Chairs to Fit 120 Inch Dining Table
Then to measure chairs to fit 120 inch dining table, measure dining chairs. Dining chairs are usually 17.5-18 inches high from the seat to the floor. The most comfortable distance between the bottom of the table and the top of the chair is about 6 or 7 inches (allowing legroom space). Therefore make sure that the distance between the bottom of the table (or apron) and the top of the chair is no less than 6 to 7 inches.