Pool table lamps – Pool table lamp hanging over a pool table. The right billiard / pool luminaries can instantly give you’re gaming area a professional look. It’s important to choose a fixture that not only reflects your personal taste, but also the size of your pool table. A 7-foot table requires a 2-lamp fixture; an 8-foot table needs a 3-lamp fixture. And each table over 8 feet in length would require a device with at least 4 lamps. Meanwhile, to hang pool table lamps, starting with when selecting luminaries, make sure that all the required hardware (a hanging chain and metal bar / ceiling mount) for the correct lighting system is included in the box.
Almost all pool fixtures contain everything that is needed, but do some, for safety reasons. 2nd, when you’re ready to install, take your tape measure and decide how best to place the light based on its size. Keep in mind that this light is intended for the table only, and not intended to give light to the whole room. At the bottom of the light should hang about 34 to 36 inches or so above the middle of the pool table, in the long run? Another way to say this is that the bottom of the light should be about 62 to 70 inches above the floor. 3rd, install the pool table lamps if necessary and attach the chain. Be careful not to damage lampshades-they are often easy to break or broken.
12 Photos Gallery of: To Hang Pool Table Lamps
4th, with packaged instructions as a guide, attach the ceiling brackets to the ceiling above the center of the table with your tape measure to help you. Climb on the steps. With your screwdriver, attach the pool table lamps to a roof mount with the chain included in the unit. Adjust the chains in the chain until the lamp is not hanging more than 36 inches above the center of the table. Last, when done, climb down the ladder and look at the results of your work. As long as the light is centered well and the height is appropriate, your lighting choice will make your playing pool a fun and enjoyable experience.